Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Several major reasons for the vibration of waste tire recycling machine equipment 2
According to different methods of applying force, waste tire recycling equipment uses methods such as extrusion, bending, impact, shearing, and grinding to crush materials. Due to the complexity of the force, the irregular shape of the material particles, and the different physical properties of the material, the material is cut by mechanical force, and the main cutting methods of tire recycling machine equipment of different costs by applying external force are as follows.
1. Crushing is to place the material between a flat surface and a sharp working plane. When the sharp working plane compresses the material, the material is broken along the direction of the pressure line of action. The reason for the split is that the tensile stress on the split plane reaches or exceeds the tensile strength limit of the material. The tensile strength limit of the material is much smaller than the compressive strength limit.
2. After crushing, place the material between the two working surfaces. After applying pressure, the compressive stress of the material reaches its compressive strength and breaks. This method is generally used to crush large materials.
3. After the surface layer is subjected to the necessary working pressure and shear stress in the work of grinding (milling) raw materials and fitness exercises, when the shear stress exceeds the cutting strength limit of the raw materials, the raw materials are sliced, or the raw materials have intertwined The cutting and cutting efficiency during friction and the crushing of raw materials.
4. Impact crushing material is crushed by impact force. Due to the instantaneous crushing force, the crushing efficiency is high, the crushing rate is large, and the energy consumption is low. Impact crushing has the following situations:
(1) Impact of moving objects on materials
(2) The impact of high-speed moving materials on the fixed working surface. High-speed moving materials collide with each other.
(3) The impact of the raw materials in the suspended and foldable form during high-speed fitness exercises.
5. The crushed raw materials are crushed by the effect of bending stress. Two-point simply supported beams or multi-point beams where the broken material is subjected to concentrated loads. When the bending stress of the material reaches the bending strength of the material, it will break. The waste tire recycling machine equipment adopts different slicing methods according to the relative products, which can not only guarantee the service life of the tire recycling production equipment very well but also improve the quality of the slicing.