Products

Waste Rubber Grinding Mill Mach Waste Tire Shredder 4M Waste Tire Tread Cutting Mac 1200mm Tire Cutting Machine Central Dust Collector Tyre Wire Removing Machine 3M Waste Tire Tread Cutting Mac Single Hook Steel Wire Drawing

Contact Us

Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)

Skype: yuxi.zhengzhou

Position : Home > News >

Problems to be considered in the design of waste tyre recycling machine

Out of the confidentiality of technology, for the time being, only a few issues to be considered before purchasing fully automated waste tire rubber powder machinery and equipment (waste tire processing production line) are shown from three levels.

1. Fully automated waste tyre recycling line, most manufacturers use the cutting principle to smash before the production line. At the present stage, most of the sales market is discarded radial tires. If the scrap tire rubber block is cut and crushed after two passes, it will inevitably cause the frequency of the stainless steel wire in the machine tool, the rubber block, and the rubber block to be effective. Everyone knows that the main purpose of fruit knives is to cut fruits, but fruit knives are also blunt when cutting fruits. What's more, the stainless steel wire and rubber block of tires are cut by the grinder? No matter how sharp the knives are, they will definitely become dull. If the second-level pulverization uses the cutting principle to smash the waste tire rubber blocks, generally in a very short period of time, the production will drop sharply. Under such conditions, the knives must be repaired. , And tool repair is very inconvenient and must consume a lot of time and human resources. Generally, a set of tools must be replaced after several times of continuous use, which will increase the maintenance cost of the investor in the future. Therefore, the investor should clearly recognize this when selecting the waste tire processing production line. The use of imported high-quality raw materials to produce and process can ensure that the tool can be used for a long time, but the price of the tool is relatively expensive, which is a situation that ordinary investors do not want to see, but once the tool becomes blunt, the replacement of the tool will inevitably be restricted. This is not What investors want to accept.

2. Because the feed end below the coarse crusher is a stainless steel screen. There are a lot of stainless steel wires in the scrap tire rubber block. After the rubber block is crushed by the coarse crusher, the stainless steel wire and the sealing glue are basically eliminated in the machinery and equipment. The material and the stainless steel wire are accompanied by the interaction force and inertia of the machinery and equipment. It causes high-speed friction with the stainless steel screen under the machine and equipment. Just like a steel brush, the stainless steel screen is brushed back and forth at a rate of hundreds of times per minute. Under such conditions, even the stainless steel screen made of metal composite material is unlikely to ensure the stainless steel screen. The long-term use of the Internet will increase additional costs for investors in the future.

3. During all the normal operation of the automatic waste tire processing production line, one or more machinery and equipment suddenly fail. As a designer, how should an effective and scientific plan come up to prevent cascading failures in the waste tyre recycling machine line.