In today's rapidly developing society and the rapid development of industry, the recycling and utilization of resources are also advocated by the state. Rubber shredders can effectively help shred waste rubber and tires, which greatly reduces the cost of rubber raw materials. What should we pay attention to when using waste tire shredders?

 

1. Before we use the tire shredder, we must conduct an inspection around the fuselage equipment to check whether the screws are firmly installed; check whether the motor circuit is connected correctly and whether there is leakage.

 

2. When the tire shredder starts, listen for strange noises in the machine. If there is noise, you should immediately stop and check to see if the belt is loose; whether there are foreign objects inside the fuselage, whether the rotor blade hits the fuselage lining plate, bearings Whether the position is badly worn.

 

3. If the waste tire crusher body vibrates violently when the machine is working, check whether the screws of the shredder body are firm; the blades on the rotor have the same weight for each group. 4. If the motor speed exceeds f inch, you should check whether the voltage is too low. Whether the material is uniform to avoid damage to the motor.