Tire Shredder Bearing Maintenance

Attention must be paid to safety during troubleshooting and maintenance. The operator must ensure that the power of the machine is turned off, remove the fuse, and hang the maintenance sign. Tested instrumentation must be used. The meter must be able to measure twice the AC and DC currents of the tyre crushing machine, and the voltmeter must be able to measure the resistivity of 5000 ohms/volt on AC current and 20,000 ohms/volt on DC current. When needed, VOM or VTVM meters can be added to help detection.

 

Before replacing the original circuit, it is recommended that users perform detailed inspection according to the circuit diagram before replacing it. Trouble-shooting of circuit faults is easy to burn the newly installed originals, resulting in waste.

Once the failure of the machine is found, it should be checked in time and replaced according to the appendix of the manual.

 

 

This repair and maintenance paragraph is applicable to Yumao intelligent environmental protection products. In case of problems with the double shaft tire shredder, please contact customer service.