Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
1.The grade of lubricating oil used in the reducer is VG320 (ISO viscosity grade). Unauthorized, inferior, or impurity-containing lubricants are strictly prohibited.
2. After the first change of the lubricating oil of the reducer, the lubricating oil should be replaced every 5000 hours. It is recommended not to exceed 1 year.
3. Reducer working environment temperature does not exceed 40 ℃.
4. When the ambient temperature is lower than 0℃, the lubricating oil must be heated to above 0℃ before starting or using a low freezing point lubricating oil. It is best to run it under no load for more than 10 minutes before starting.
5. Reducer is suitable for continuous operation, and allows both forward and reverse operation.
6. When installing or removing the reducer, it is not allowed to hit any part of the reducer with a heavy hammer.
7. Be sure to check whether the lubricating oil surface meets the requirements before turning on the machine, and check whether the rotation is flexible.
8. Change the oil every about 5000 hours. It is recommended not to exceed 1 year.