Main Parts of Large Capacity Waste Tyre Recycling Machine

1.. Tire Debeader

Tire debeader uses a hydraulic system to pull out the whole bead wire of the tire.

 

2. Tire Shredding Machine

The belt conveyor carries the whole tire into the tire shredding machine, which shreds the tire into rubber blocks.

 

3. Automatic Feeder

The automatic feeder conveys the rubber blocks into the crusher.

 

4. Rubber Crusher

Rubber crusher is the main machine of the tire recycling plant. It crushes the rubber blocks to rubber powder, which falls onto the main vibrating screen.

 

5. Main Vibrating Screen

The main vibrating screen separates different sizes of rubber powder. Larger powder enters into the automatic feeder which sends the powder into the crusher for the second crush. The powder with the required mesh falls onto the roughing magnetic separator. When processing a nylon tire, the thick nylon will flow onto the surface and can be taken out manually. falls onto the roughing magnetic separator. When processing a nylon tire, the thick nylon will flow onto the surface and can be taken out manually.

 

6. Roughing Magnetic Separator

The roughing magnetic separator separates the steel wire from the tire crumb. Steel wire falls down while crumb rubber enters into the vice vibrating screen.

 

7. Vice Vibrating Screen

Rubber crumb that meets the required size enters into the concentration magnetic separator. Larger ones are conveyed back to the crusher for crushing again.

 

8. Concentration Magnetic Separator.

The rubber powder is processed by the magnetic separator again. Pure