The waste tyre recycling machine overall workflow is divided into the following steps:

1 Wire drawing machine: Pulling steel wire armor tires from the tire ring can be shredded directly by the shredder in the next process.

2. Shredder: Shredder shreds the whole tire after drawing into 3-8 cm rubber blocks;

3. Steel wire separator: The 100mm * 100mm rubber block is processed into 10-15mm rubber particles, and the steel wire and rubber are separated at the same time.

4. Vibrating sieve: sort the rubber particles of different sizes. The oversized particles are sent back to the rubber powder machine for secondary crushing.

5. Magnetic Separator: remove small wires that may remain

6. Rubber pellet machine: The rubber from the steel wire separator can reach 1 mm after crushing. Then through particle screening and circulation to achieve a finer size. Due to the special design of the granulator, high-quality granules of uniform size can be produced. 99% of the fibers are removed during the granulation process.

7. Fiber separator: removes foreign materials and fibers