Granulator of waste tyre recycling machine

The Granulators are designed to grind the rubber mulch from the Grater into small granules as fine as 1mm. The granules are screened and re-circulated until the desired size is reached. Due to the design of the Granulator and precise alignment of the blades, the Granulator produces a very uniform cut and high-quality granule. For rubber processing, Granulators are typically the third station in the tire recycling lineup. At this stage, wire-free material is processed from the secondary shredder into the granulator, which reduces further into uniform granules with all steel and fiber removed. These shredders are high-speed knife mills that reduce feedstock to particle size.

 

This machine is where the fiber removal and extraction begins. Passenger tires typically contain 10-15% nylon or polyester fabric by weight. Granulators output crumb rubber, which is typically 3/8” – 400 microns (0.400 mm) in size.  While there is a multitude of similarly designed granulators in the market today, look for one that is engineered specifically for the type of material you are processing.

 

Granulator Processing:

 

●Rubber Mulch is reduced to 3/8″-400 microns (0.400mm) crumb

●Granulators reduce materials to particle size shreds

●Granulators typically process up to 3 tons/hour of input

Granulator Markets:

●Scrap Tire Rubber Market

●Scrap Plastics Market

●Useful for other Waste Material

●Markets

 

Granulator Benefits:

 

●Quickly Reduces Rubber Mulch into small rubber granules

●Removes 99.9% of tire fiber

●leaving contaminant-free rubber granules

●Preferred machines for specific material output sizes