The technical process and characteristics of waste tyre recycling machine:
Flowchart of tyre recycling machine
1. Tire ring cutting machine: The tire ring cutting machine is a piece of special equipment for cutting the inner ring of the tire.
2. Tire crusher: The tire crusher is a piece of special equipment for crushing the tire after the inner ring is cut to a rubber block of about 50 mm. The rubber strip after the first crushing is sent back to the crushing room by the round steel screen through the screening system. After further crushing, the rubber blocks that meet the requirements leak out through the mesh of the round screen.
3. Rubber middle crusher: The rubber middle crusher is a piece of special equipment for crushing the rubber block crushed by the tire crusher to 6-12mm rubber particles.
4. Magnetic separator: The products coming out from the discharge opening of the rubber crusher are: rubber particles, steel wire, fiber cloth, and the steel wire can be separated by the magnetic separator.
5. Rubber fine crusher: It is special equipment for crushing 6-12mm rubber particles processed by rubber middle crusher into 1-3mm rubber particles at normal temperature.
6. Double-grinding disc rubber grinder: The rubber grinder is special equipment that grinds rubber particles of 5 mesh to 10 mesh into 40 mesh to 120 mesh rubber powder.
7. Airflow sorting machine: manufacturing air vortex, separating rubber particles and fibers, and sorting rubber powder into coarse and fine. By adjusting the sorting accuracy of the sorter, 40 mesh-120 mesh rubber can be sorted separately powder.
8. Glue powder quantitative bagging machine: can achieve quantitative bagging according to needs.