Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Tire shredder equipment is very good at shredding various metal materials, entangled plastics and garbage. Some users react to occasional jamming during the production process. When the tire recycling machine is running, the load will increase Large, in the scrap metal processing industry, the material of the metal is relatively different, so there will be fluctuations, so when different screens are used, it will have a great impact on the load of the shredder equipment.
When the waste tire recycling machine uses a sieve with a sieve diameter of 1.2 mm, the motor capacity should be 40 kW; when a sieve with a sieve diameter of 2 mm is used, the motor capacity should be 30 kW; When sieving the sheet, the motor capacity should be 22 kW, otherwise it will cause some waste.
For whether the tire recycling machine is overloaded, Yuxi Machinery has its own set of methods to detect:
1. Contacts: The material level gauge indicates the material level in the crushing cavity, that is, its load is known.
2. Weigh the conveying capacity of the shredder feeding belt conveyor with a belt scale.
3. Calculated by calculating the cyclic load of the shredded, screening closed circuit system. Detect the current value in the motor circuit of the shredder equipment. The current when the shredder works is generally controlled at about 85% of the rated current. When multi-stage shredding, only the load of the later stage that controls the particle size of the final product is generally detected. This tire recycling machine is usually in a closed-circuit system, and its feed volume includes the amount from the previous shredder stage and the cycle load. .