Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
A large waste tire recycling machine is a large type of equipment that is generally expensive and not suitable for easy repurchase, so daily maintenance is very important to it. I previously introduced how to maintain large tire shredders in summer. Today, the editor of Zhongzhou Machine Tool specially collected some maintenance and adjustment tips for tire recycling machines. I hope to help you:
1. After the sharp angle of the hammer piece is blunt, you can use it to reverse the angle adjustment. If both corners of the hammer piece are worn, you should use it to turn your head. When adjusting the angle or turning the head, all hammer pieces should be carried out together to maintain the balance of the rotor.
2. The sieves should be replaced after they are worn or damaged. When installing the sieve plate, the burr side of the sieve hole should face inward and the smooth side outward, and the sieve plate and the sieve frame should fit tightly.
3. After the completion of each shift, the surface of the machine should be cleaned and cleaned to remove dust and dirt, to avoid rusting the machine, blocking the sieve, and entering the dust and dirt in the bearings.
4. Regularly check, clean and smooth the bearings.
5, when found that the machine parts are severely worn and damaged, they should be repaired and replaced in time, and the corrected rotor should be balanced.
The above are the 5 tips for adjusting and maintaining the tire recycling machine introduced by our Yuxi machinery. If you have any other questions, please contact us, and we will give you a satisfactory answer.