Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Although the waste tire shredder is a good equipment for the coarse crushing of waste materials, it will also be affected by some conditions during the work. What kind of situation affects the work of the tire, then you need to have an understanding of the working condition of the tire recycling machine equipment.
The structure of the tire shredder is relatively simple. It can be seen from its appearance. Its main working part is the blade driven by the shaft of the shred cavity. The blade does not have a sharp edge, but each adjacent blade They are bitten tightly, just like the scissors we use. The tip of the blade looks sharp and has a hook shape. The material that enters the shredder chamber is first caught by these hooks, and then cut by the blade to perform shredding operations. Understand the working principle of the tire recycling machine, then we know what kind of situation will be sincere operation Make an impact.
The size of the blades of different types of tire recycling machine are different, so the size of the teeth is also different, so the size of the incoming material must conform to the size of the material, otherwise the teeth cannot catch the material and cannot catch it. There is no way to cut and shred the material, so there must not be too large material when unloading, because if such material is blocked, it will affect the entry of subsequent materials, which will really affect the production volume. Therefore, picking should be carried out when feeding, and unsuitable materials should be sorted out so as not to affect the production volume.
Maintenance after a tire recycling machine is also important. When adding transmission oil, make sure that the transmission oil is not lower than the standard filling amount, and check it regularly. The addition of lubricating oil to bearings is relatively frequent. When cleaning the equipment after each work stop, check whether the temperature at the bearing is too high. The higher the temperature may be caused by the decrease in the amount of lubricating oil. It must be added in time so as to ensure that the equipment does not malfunction during work.
During the operation of any mechanical equipment, you should pay attention to observations and deal with problems in time to avoid major failures.