Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
The current waste tire shredder equipment has been used in the coarse crushing of many materials. Due to the different properties of the materials, the difficulty of shredding is also different. In order to improve the driving power of the shredder, the current shredder equipment mostly uses dual-axis power Design, so that the material will not be jammed due to insufficient power during the shredding process.
The power of the tire shredder is sufficient, but depending on the material being cut off, there may be thicker materials that can cause the overlapping materials to jam. If a jam occurs, untimely shutdown processing can cause equipment failure. damage.
In order to deal with the damage caused by the material card machine to the tire recycling machine, the shredder is equipped with an automatic protection function. This function can protect the equipment when the card machine is in reverse discharging operation, and the material of the card machine is reversed through the shaft. Allow the materials to be reordered and shredded again, which effectively protects the motor from being damaged due to the long card machine time.
So how does this work?
In fact, this kind of setup is also relatively simple. Generally, it is set in the control cabinet of a tire recycling machine. A control unit that allows the motor to perform forward and reverse rotation is installed in the control cabinet. Normal working conditions are forward rotation.
If a jam occurs during the work, then the motor is still working, and the current of the motor will increase at this time, then the current change of the motor can be controlled. The current during normal operation is constant, so the current value during normal operation can be locked by the current controller. If the current value is higher than the locked current value during work, it is because the card machine causes the motor current to exceed High, this is the current controller will give the motor a reverse signal, let the motor run in reverse, used to release the situation of the card machine, thus effectively protecting the normal operation of the tire recycling machine equipment.
Regardless of the operation method, the protection of the equipment is more important. When there is a problem with the equipment, it affects normal production. Therefore, the problems that occur during the use of the tire recycling machine equipment will be continuously improved by the manufacturer. Users can use equipment with low failure rates.