Products

Waste Rubber Grinding Mill Mach Waste Tire Shredder 4M Waste Tire Tread Cutting Mac 1200mm Tire Cutting Machine Central Dust Collector Tyre Wire Removing Machine 3M Waste Tire Tread Cutting Mac Single Hook Steel Wire Drawing

Contact Us

Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)

Skype: yuxi.zhengzhou

Position : Home > News >

The operation of tire shredder and its precautions, check the operation of the tire recycling machine, you should pay attention to 11 points:
I. Close the magnetic starter to the power supply.

2. Press the button two or three times.

3., start the tire recycling machine, and let it run idle for 1-2 weeks.

4. Make the reprinter and tire shredder run together.

5. If there is no abnormality after the inspection, a start signal is issued.

6. There must be no vibration, sound and humidity in the operation of the tire recycling machine. The temperature of each bearing must not exceed 75 ℃, and the temperature of the motor must not exceed the manufacturer's requirements.

7. The chain tension of the loader must be kept consistent. Under full load, the chain tension must not exceed the length of two chain links.

8. If the fusible plug or explosive chip of the joint of the transferer is damaged, it cannot be replaced by wood or other materials.

9. Keep the safety net safety device of the tire shredder intact, check frequently during the work, and immediately stop the machine if it is damaged.

10. It is necessary to keep the safety devices such as the tail protection of the waste tire shredder intact.

11. Clean up the floating coal and floating rafters on the tail, sides of the fuselage and under the bridge.　

Get a Free Quote Now!

Tel：0086-0371-53762053

Tel：0086-13674998188

Whatsapp：0086 13674998188

Wechat:8613674998188

Skype：yuxi.zhengzhou

E-mail：zhengzhouyuxi@yuximachine.com