Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
If it is found that the brushes and commutator of the tire shredder are faulty, they should be replaced in time, especially in the case of wear and tear. The operation of shredder should pay attention to the operation of the motor, especially the bearing parts should be regularly filled with grease.
At the same time, you can understand the different characteristics, so that you can have a better positioning in the selection process, you can make more judgments yourself, so that the overall function of the shredder can be displayed. The production efficiency is faster, and the overall stability of production can be better.
Before the shredder is officially assembled, the rust, oil, dust, etc. on the mechanical parts should be cleaned. When cleaning, use a diesel, kerosene or gasoline brush, or wipe with a clean cloth. If you have plastic parts, you cannot clean them with organic solvents.
During the cleaning process, to prevent the surface of the shredded part of the waste tire recycling machine from being scratched, the oil holes on the bearing box must be unblocked, and then gauze or cotton thread should be inserted into the holes to prevent dust from entering. For example, the weight of pulleys, gears, tire recycling machine blades, etc. must coincide with the center of rotation. Otherwise, the tire shredder is running, which may affect the use of mechanical equipment due to the movement of the center of gravity. After the tire recycling machine is completed, tools such as wrenches must not be left in the tear chamber. After the power is turned on, the machine is turned on for 3 to 4 seconds. The machine runs normally after there is no abnormal sound or vibration.
When the tire shredder encounters a failure and needs to be repaired, it is necessary to take the equipment apart for inspection and maintenance. For non-technical personnel, disassembly is easier, but reassembly is more complicated, including parts. The assembly process is divided into parts according to the requirements of the assembly drawing. The process of assembling the whole machine should also include the adjustment of the assembly process and the testing machine after assembly. After completing the above process, there is no problem to use with peace of mind.