Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
The installation and commissioning of waste tire shredder machine. Generally, we will attach a foundation plan and design foundation construction drawings when delivering the product to customers. When the force is even, the sleeper bar can be placed under the base frame to make the whole machine fit with the sleeper bar and leave the discharging position.
Check the load test of the tire recycling machine. The load test can only be performed on the basis of a good dry running test. The load test time should not be less than 8 hours of continuous operation. Determine whether the actual output and output of the tire shredder meet the requirements. Ensure that the temperature rise of the bearing does not exceed 35 degrees, the shredder should work smoothly, there should be no severe vibration, and the fasteners should be reliable. Each lubrication point of the tire recycling machine must be filled with lubricating grease, the seal should be good, and there should be no leakage. If the output or particle size is found to be inconsistent during operation, you can use the adjustment bolt at the rear of the movable device to adjust. Stable, you should check whether the particle size of the feed meets the requirements, and it can be put into production after the load test is normal.
Tire recycling machine is a machine that uses the frictional force of the roller surface to bite the material into the crushing area, so that it can withstand crushing or crushing. When used for coarse crushing or when the crushing ratio needs to be increased, tire shredder often makes teeth or grooves on the roller surface to increase the splitting effect. If you have any questions about the use of tire shredder, please feel free to contact us to solve them