Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
How to maintain the waste tire shredder machine motor operating at high temperatures to survive the hot summer.
Tire recycling machine is an essential equipment in the processing of waste materials. The equipment motor is the main core of the equipment. If the motor is broken then the device will not function properly. So protect the motor parts.
How to eliminate the tire shredder motor failure, the following Yuxi tire shredder manufacturers call you a few small tricks.
1. The work of the motor department checks whether the motor bearing is excessively worn or poorly assembled, causing the stator and rotor to rub, causing damage to the surface of the iron core, which in turn causes short circuit between the silicon steel sheets, and the iron loss of the motor increases, causing the temperature rise of the motor to be too high. At this time, the tool is used to remove the burr, the silicon steel sheet is short-circuited, the insulating paint is applied after cleaning, and the heating is dried.
2. The tire recycling machine should be checked at high temperature to check the looseness of the motor core and the base. The original set screw can be tightened. If the positioning screw fails, re-drill the positioning hole on the base and tap the wire to tighten the set screw. The bearing failure repair shaft is rotated by the bearing support, which is a very heavy load part and is a component that is easy to wear.