The advantages of the waste tire shredder hydraulic transmission is that other transmission methods are irreplaceable.
(1) Tyre recycling machine hydraulic transmission is easy to achieve whitening and automatic control, such as: by machine tools, mining engineering vehicles and so on.
(2) Can make a huge force. For example, the Drilling Ship is fixed at sea and uses four legs to break into the seabed. Each leg uses 400 tons of thrust. This is the force of hydraulic transmission.
(3) Achieve large transmission ratio speed regulation. If the mechanical transmission is used, the speed reduction mechanism will be very large, and the speed is difficult to be even.
(4) Tire recycling machine hydraulic transmission is agile.
(5) Stepless speed regulation.
(6) Constant power control.
The disadvantage of the tire recycling machine hydraulic transmission is that the seal is prone to oil leakage. The oil has high requirements for the essence and is inconvenient for the management of the oil.

Correctly Maintain the Blade of Shredder Machine to Extend Its Service Life

1. The blade should be selected reasonably according to the hardness and strength of the shredded items.
2. Prevent damaging to the blade during the installation.
3. Pay attention to the wear of the blade, whether there are other foreign objects on the blade and the rotating shaft, and frequently clean up the debris on the blade. Pay close attention to the cutting edge of the to-be-shredded materials, which can reflect the existing situation of the blade.
4. When the waste tire shredder is not working, coat the shredder blade and the middle shaft with lubricating oil frequently, which can not only reduce friction, but also prevent the shredder blade from rusting and extend its service life.
5. Make a statistics on the energy consumption of the shredder. When the current suddenly increases during a certain period of time, it indicates that the shredder works under bad condition. It is necessary to immediately stop and check the machine, generally, the shredder blade has foreign matter which prevents the blade from cutting objects.
6. The blade of the double-shaft shredder should be polished regularly. For example, the knives used in our lives will become unsharp after using a long time. The blades of the shredder need to be polished with professionally sharpening tool, so as to ensure its sharpness.