Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
In the radiator recycling machine, an accessory that is very prone to failure is a rolling bearing. Today we will introduce some of the basic features of its failure, for users' reference.
1. Fatigue peeling off. The rolling bearing of the rolling radiator in the waste radiator recycling machine and the rolling body are subjected to alternating loads during operation, and after a long time of operation, some cracks are formed on the contact surface. When these cracks appear, they will continue to spread and eventually form spalling. It will directly lead to the failure of the rolling bearing.
2. Wear. When the waste radiator recycling machine is running, the movement between the raceway and the roller and the entry of debris will cause the bearing to wear and cause serious lubrication difficulties. After this happens, the bearing will aggravate the vicious cycle of wear. And eventually the accessories failed.
3. Corrosion. This situation is more likely to occur when the fitting is poorly sealed. At the same time, if the internal current of the accessory passes a large current, it will cause corrosion and wear of the accessory, and over time, the accessory will be invalidated.
It is the main features and causes of the failure of the rolling bearing in the waste radiator recycling machine. Since this accessory is primarily responsible for the power transmission function, it is not only important but also stressful. Therefore, when it is running, it should be tested frequently, causing economic losses.