Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Yuxi's existing technology is sufficient to support the prevention of fretting fatigue in the tire shredder accessory. In our technology, based on the value of the estimated parameters.
If the contact area appears in the stress concentration, the R value will be high. This can be done by opening the stress relief groove. Both O and R depend on the coefficient of friction, so the use of lubrication or surface coating methods to reduce the coefficient of friction allows this problem to be effectively changed.
It is important to keep in mind that it may be necessary to join the nodes to transfer the stress, and the reduced friction coefficient can be increased in and transferred to other parts of the waste tyre shredder machine.
Of course, there are other methods, but the effect is less obvious. Since the end result of this method is to cause residual stress on the surface of the fitting of the tire recycling machine, it can also be applied to surfaces subjected to cross stress.
In recent years, Yuxi Machinery has made good progress in ion implantation technology in its continuous technological innovation.
It can make ions of any one element adhere to the surface of the material under the action of vacuum high voltage. It is possible to increase the depth of ion implantation to a depth that can be achieved by external ions in the diffusion process.
Therefore, this technology is also well applied in the new tyre recycling machine. Most of the machines that everyone bought at Yuxi today have used this technology.
The great convenience it brings is that the lubrication work that needs to be done frequently now becomes only once in a year, which greatly reduces the workload of the personnel.