Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
1. After the tyre shredder bearing is purchased, check whether the packaging (with the instruction manual and certificate of conformity) is in good condition; whether the identification (factory name, model number) matches; whether the appearance (corrosion, damage) is good;
2. Regularly refuel the shredder bearings and ensure that the surrounding environment is clean when refueling.
Use clean hands to refuel, slowly rotate the entire bearing with one hand, and press the middle finger and index finger into the bearing cavity with one hand. Add one side and then proceed to the other side. Use a blade to remove excess grease and do not allow different types of grease to be added to the same bearing.
3. When the bearing is installed, the force point is ensured evenly (the inner ring of the shaft is subjected to force, and the inner and outer rings of the end cover are stressed). The bearing is prevented from being mounted and the bearing is damaged.
The press-in method and the hot-sleeve method can be used, and the contact surface is evenly applied during installation.
A little grease is good for installation. After the bearing is installed, the inner ring of the bearing and the shoulder clearance must be checked (no gap is good).
Yuxi Machinery is a professional tire shredder and tire recycling plant manufacturer. Our tire shredder bearings are made of high-strength steel, which has extremely high wear resistance and pressure resistance.