1.The working principle is different:
|
The steel wire drawing machine
|
The Single hook debeader
|
Through the reducer, the two wheels are driven by the gears to promote the strong and slow relative operation. Because the deceleration of the two turns is relatively different, the ring is forced to be crushed by the strong rotation of the wheel between the two wheels. Therefore, the thin steel wire of the ring portion is broken, the rubber is split, and the thick steel wire is effectively obtained, and separated from the rubber.
|
The hydraulic system and the oil cylinder are driven by the motor, and the hook is connected to the cylinder rod, and the movement of the oil pump and the cylinder causes the hook to reciprocate. Place the tire in the pull port and hook the wire on the inner ring of the tire, then press the start button. Due to the strong pulling force of the oil cylinder, the whole steel wire will be pulled out.
|
|
2.The completed steel shape is different
|
Get the round steel
|
Get the irregular steel
|
3.The Unit price is different
|
If you need more details about our products, please write what you need, we will contact you asap with favorable prices!
Please click on "WhatsApp" contact us at any time.