Products
Contact Us
Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Skype:
yuxi.zhengzhou
Follow Us:
1. When the waste tire shredder machine blade is installed, the nut must be tight and tight.
If it is too loose, the saw blade will slip during rotary cutting.
If it is too tight, the saw blade will have internal damage or deformation affecting the cutting effect.
2. Regularly check the radial runout of the machine's main shaft, and the swing to ensure the mutual fit between the shredder blade cuts.
3. The shredder blade should be idling for 30 seconds after it is installed smoothly, and then start cutting work after confirming that everything is normal.
4. The shredder blade must be cleaned of debris on the spindle and flange before installation. The surface of the flange should be flat, clean and perpendicular to the axis.
If it is too loose, the saw blade will slip during rotary cutting.
If it is too tight, the saw blade will have internal damage or deformation affecting the cutting effect.
2. Regularly check the radial runout of the machine's main shaft, and the swing to ensure the mutual fit between the shredder blade cuts.
3. The shredder blade should be idling for 30 seconds after it is installed smoothly, and then start cutting work after confirming that everything is normal.
4. The shredder blade must be cleaned of debris on the spindle and flange before installation. The surface of the flange should be flat, clean and perpendicular to the axis.
