Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Usually pay attention to check the environmental conditions of the soft start and the whole tire recycling plant to prevent it from operating beyond its permitted environmental conditions. Be sure to check the soft starter of waste tire shredder motor for objects that prevent it from ventilating and cooling, and make sure there is enough space around the soft starter (greater than 150mm).
Regularly check whether the terminals of the distribution line are loose, and whether the components in the cabinet are overheated, discolored, and smelly.
Clean the dust regularly to avoid heat dissipation, prevent the thyristor from being damaged due to excessive temperature rise, and avoid leakage and short circuit accidents caused by dust.
Cleaning dust of the whole tyre recycling plant can be done with a dry brush, or with a leather tiger blower and a vacuum cleaner. For large pieces of dirt, it can be removed with an insulating rod. If conditions permit, it can be blown off with compressed air of about 0.6 MPa.
Usually pay attention to observe the operation of the fan of tire recycling machine. Once the fan speed is found to be slow or abnormal, it should be repaired in time (such as removing grease, dust, lubricating oil, replacing damaged or deteriorated capacitors). Replace the damaged fan in time. If the soft starter of tyre recycling machine motor is used without a fan, the thyristor will be damaged.
If the soft start environment as well as the tire recycling machine is damp or condensation, it should be dried frequently with an infrared bulb or a hair dryer to remove moisture to avoid leakage or short circuit accidents.