Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
3. Regularly add grease to the waste tire shredder machine. It is common to assemble a cap-type oil cup on the bearing. Under normal circumstances, as long as the oil cup cover is rotated 1/4 turn every 2 hours, the grease in the cup is pressed. It can be inserted into the bearing. If it is a closed bearing, it can be filled once every 300 hours. After long-term use, if the grease is deteriorated, the bearing should be cleaned and replaced with new grease. When the tyre shredder is working, the temperature of the bearing should not exceed 40 °C. If the bearing temperature continues to increase under normal working conditions, then the bearing temperature will continue to increase. You should find out why and try to troubleshoot.
4. Carefully clean the raw materials to be shredded. It is strictly forbidden to mix metal parts such as copper, iron, lead and other large stones into the shredding room of tire recycling machine. Do not arbitrarily increase the speed of the production line. Generally, the difference between the rated speed and the rated speed is about 10%. When the tyre recycling machine is working with a larger power machine, you should pay attention to controlling the meteor and make the meteor uniform.
In summary, the maintenance of the tire recycling machine needs to be timely, more patience, and can not appear a little sloppy.