Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Correct use is just as important as maintenance. The correct method of use can better maintain the machine and bring greater benefits to itself.
But no matter what kind of machine, there will always be some problems and malfunctions. Let's talk about the simple maintenance method and use of the waste tire shredder.
The operation method of the 800 type tire shredder is also safer for the whole tire recycling plant, longer, paving, and maintenance to reduce more wear and tear. The operation method is as follows:
1. After idling of tire recycling machine for a few minutes of normal operation, the material can be started.
2. The material to be shredded should be evenly added into the tyre recycling machine cavity. Avoid side loading or full filling to prevent unilateral overload or overload.
3. Under normal conditions, the temperature rise of the bearing does not exceed 35 °C, and the maximum temperature does not exceed 70 °C. If it exceeds 70C, it should be stopped immediately, and the cause should be eliminated.
4. Before stopping the tire recycling machine, the feeding work should be stopped first. After the torn material in the torn cavity is completely discharged, the motor is turned off.
5. When shredding, if the tire recycling machine is stopped due to blockage of material in the tearing chamber, the motor should be turned off immediately, and the material must be removed before restarting.