Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
With the development of the economy, the service industry continues to expand. Our company has extended the after-sales service from the product manufacturing to solve all after-sales problems for you. Today, I will tell you how to repair and repair the waste tire shredder fpr sale.
1. The rupture of the inner shell of the tyre shredder causes the inner shell coarse material to leak into the outer casing, which makes the fineness of the finished product thicker. In this case, the method of entering the control panel or increasing the number of auxiliary wind blades will also be ineffective, and the product fineness will still be very thick. At this time, the tire recycling machine should be stopped for inspection. The inner casing is more likely to wear and damage at the bend of the lower conical discharge pipe. If there are holes, they can be temporarily welded and repaired.
2. The blade of tyre recycling machine is detached or broken: When the auxiliary blade comes off, the fineness of the product suddenly becomes thick and fluctuates. At this point, the tire recovery machine body swing is light, should be closed and checked in time.
3. The control panel is not aligned: during the operation of the tire shredder, the control panel may move inward or outward due to the vibration of the main body, resulting in a change in the fineness of the product. At this time, it is also necessary to check whether the size of the control panel is uniform, so that Timely correction.