Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
The quality and reliability of the waste tire shredder and processing rubber powder machine is not only the quality, but also the maintenance in the later stage. Because the wearing parts of the mechanical equipment are easy to wear, it is necessary to do their maintenance work. The working conditions of the waste tire processing and processing rubber powder machine can be said to be very bad. The rotor and the bearing are easy to wear, which will affect the crushing effect and service life of the equipment. Therefore, the bearing must be regularly maintained, then how to maintain the waste tire processing Rubber powder machinery bearings? Yu Yu Machinery teaches everyone:
1. Lubrication of bearings: The purpose of lubrication is to reduce frictional resistance, improve heat dissipation conditions, reduce contact stress, absorb vibration and rust. Therefore, during use, the bearings need to be lubricated regularly to prevent the equipment from being shut down due to excessive temperature rise. The choice of lubricating oil is generally determined according to the location of the equipment, temperature and other conditions. It must be filled once every eight hours. When changing oil, carefully clean the bearings with clean gasoline or kerosene, and add the lubricating oil in the bearing housing to the volume. 50%.
2. Fixing of the bearing: There are generally three ways to fix the bearing: 1 circumferential fixing: the inner ring of the bearing and the shaft diameter adopt the interference fit, the outer ring and the bearing seat adopt the excessive and clearance fit; 2 the axial fixed: the shoulder is adopted The sleeve and the bearing cap are fixed, suitable for the shaft rotating at high speed, and subject to large axial force; 3 fixed at one end and swimming at one end: this fixing method is suitable for the shaft with large temperature variation.
3, the replacement of the bearing: due to the harsh working condition of the waste tire processing and processing rubber powder, and the bearing is its main transmission power component, therefore, the bearing wear can not be avoided. If the bearing needs to be replaced after it is severely worn, the bearing wear condition should be checked regularly to avoid serious production accidents.
Yuxi Waste tire recycling plant win EU's CE certification which is not easy to get in the domestic market, meet high standard quality certification.
Our tire recycling machine line can be based on customer's requirement, recycling within 400-3000mm diameter tires, the capacity can reach 200-10000kg/h, the whole tyre recycling plant can adopt PLC control system, easy operation, and maintenance, low consumption, long lifetime.
Yuxi Machinery—a professional enterprise dedicated to the recycling and recycling of used tires for 21 years.