Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
How to extend the service life of tire shredder blades?
The tyre shredder blade is not good, the finished product after shredding will be uneven in size, and the output will be greatly reduced;
When using the tire recycling machine, the feeding personnel should be careful, such as nails, metal blocks and other materials can not enter the machine, otherwise it will cause serious damage to the blade, and even cause card machine and other phenomena;
When adjusting the blade, be careful to avoid the blade hitting a certain part of the machine and damage the sharpness of the blade;
When replacing a new blade, make sure that the length of the blade is the same and the quality is the same. Avoid the blade being too long or light and heavy, which will cause the rotor in the machine to be unbalanced. This will cause noise and vibration during the production.
Also, after the blade is replaced, be sure to check the screws on the upper blade to ensure that the screws are tightened to avoid loosening of the screws in the future production.
A set of blades of the tyre recycling machine divides the blade and the movable blade. The angle of the knife edge determines the quality of the tire shredding. The blade angle of the fixed blade is generally 90°, and the blade angle of the moving blade varies greatly from 30-37 °.